P-47 Thunderbolt model replica
Replica of this iconic WWII fighter pedals for flight sim. Produced in original green cockpit color of american fighters of that age. Get a piece of history with this model and fly comfortably too.
Search
Cart
0 Product: Products: (empty)
No products
To be determined Shipping
USD $ 0.00 Total
Product successfully added to your shopping cart
Quantity
Total
There are 0 items in your cart. There is 1 item in your cart.
Total products
Total shipping To be determined
Total
MFG Crosswind V3 P47 Thunderbolt rudder pedals
Thunderbolt P-47 replica model - rudders for PC flight simulation, Windows (any)/Mac OS/Linux compatible
Consist of our universal base and selected footrest model
Made in Croatia , Europe
P-47 Thunderbolt model replica
Accessories for rudder pedals
Hydraulic Damper universal kit for V1-3 pedals
0015Kit consist of 1x Adjustable hydraulic damper, Composite damper holder, 2x Din912 M8x40, 1x Din912 M8x80, 2x Din912 M6x35 screws, 2x Aluminum 16,5mm long ring Stand-offs ( Spacers)Compatible with MFG Crosswing V1,V2 and V3 pedalsAdjustable damping force (23 increments)Installation on V1,V2 is a bit more complex than on V3Allan imbus key for M8 screw not...
USD $ 51.08 Tax excluded81 Review(s)-
WAP (Width adjustment plate for MFG rudder)
WAP - Set of Width Adjustment Plates for MFG CrosswindCompatible with V1,V2 and V3 pedals
USD $ 21.28 Tax excluded14 Review(s) -
CAM5 centering profile for MFG pedals
Alternate Centering profile for rudder axis on MFG CrosswindCompatible with V1,V2 and V3 pedals
USD $ 14.56 Tax excluded3 Review(s) -
Soft Spring for MFG Crosswind
0116Soft spring for main rudder axis centering. Considering that standard spring that comes with pedals is very realistic and therefore provide adjustment range from middle strong to strong, we offer this soft variant which provide force range variation from extreeme soft to middle strong.If you are used to softness in majority of plastic pedals and you like...
USD $ 4.48 Tax excluded8 Review(s)
2021 V3 model of rudder pedals
Full changes will be published soon along with new pictures. There are no drastic visual changes in design. however, pedals have undergone substantial changes "under the hood" resulting in beefier (sturdier) critical components and reshaped parts based on 7 years of experience in customer support. There are some notable news too :
- built in threaded holes for hydraulic rudder damper addon
- pre-assembled brake cables secured with cable clamp to prevent damage from cable twisting/pulling
- Overall width of standard pedals reduced 5mm (From 495 to 490mm)
- Modified Me109 style Footplates are 1cm longer with a detachable heel cup (on 2 screws), therefore customers can now increase height of heel cup if their set up require very steep angle of the footrests ( e.g. low seat cockpit)
For P47 Thunderbolt footrests you will need Imbus key 4mm. Make sure you buy it if you dont have one.
-
Imbus hex key 4mm UNIOR
0016Imbus hex key 4mm UNIOR, also called Allan key Required tool for fixing 3d printed footrests with Din7991 M6 screws
USD $ 4.48 Tax excluded
Unparalleled accuracy, longetivity and response time
High resolution contactless magnetic sensors guarantee high precision without degradation over time, making spikey potentiometers thing of the past. Modern electronics provide up to 500 updates per second (capped as >500 saturates some flight sims)
3rd generation triaxis digital Hall sensor on rudder axis and analog hall's for brakes ( 8192 positions per axis )
Stepless pedals angle adjustment and toe-out
Minimum angle = 21° ( goes fully horzontal when brake applied )
Maximum* angle = 52°
* can be extended up to 61° by adding 10mm support plate under pedals, or by using "width adjustment plates" extra cost option
Differential Toe Brakes
Independent left and right brake axis ( 20 degree motion ) combined with strong torsion return springs provides excellent braking action and feel
Adjustable and smooth rudder centering design
"cam & arm" centering principle for smooth over the center transitions
Fine tunable knob for rudder "return to center" pretension force adjustment
Exchangeable centering " CAM " profile
CAM centering profiles have influence on progressivenes of force increase when deflecting rudder axis as well as center notch. That allow fine tuning the feel to reflect realistic forces of different aircrafts.
2x CAM's come standard with pedals ( CAM4 & CAM6 ) while more CAM's can be purchased as extra cost option ( currently CAM5 available )
Detailed explanation in PDF file
2x notch for rudder spring
To achieve stronger or weaker force toward the end of pedal deflection while force near the center remains the same
Software and electronics
13bit "plug and play" (HID) driver, compatible with Windows XP/Vista/7/8/8.1/10/11 *
bootloader feature enable effortless firmware upgrades
MFG Configurator software enable advanced sensors calibration, many other handy features. Sofware is a simple .exe file ( no installation ) Settings are stored in electronics memory.
* drivers compatible with Linux and MacOS, but require adjustments under windows as our software work under windows only
Additional info
Made by CNC machining to achieve highest acuracy
Wall spacers - Adjustable pedals position from the back wall.
Sturdy Composite material construction with some aluminium parts, 17 bearings
Four holes for fixing pedals to any base surface/cockpit
Included allen hex key for making adjustments and 2m USB A/B cable for PC connection
FORUM THREADS
Moved to main downloads section