No products
Product successfully added to your shopping cart
There are 0 items in your cart. There is 1 item in your cart.
rudder spare parts
There are 13 products.Pay attention that you purchase correct parts for your rudder pedals version !
Pay attention that you purchase correct parts for your rudder pedals version ! Less
Brake axis shaft SET
This is a spare part for MFG Crosswind rudder pedals. Consists of both LEFT + RIGHT shaft NOTE For V1 pedals : it is likely that you will need small spacer of 0,5mm under sensor cap for a sensor to operate at full range of adjusted angles. spacer can be made of simple paper for example !Compatible with V1,V2 and V3 pedals
USD $ 45.74 Tax excluded-
MFG SiMM8Rge USB joystick controller
0101USB universal joystick controller boardFitted in MFG Crosswind rudder pedals since S/N 0337 (V2&V3)Rudder pedals firmware is v5.xx (current v5.05)Universal joystick firmware is v7.xx ( current v7.16)Made in Croatia ( EU )Read description for full info
USD $ 41.17 Tax excluded12 Review(s) -
Brake sensor Cap SET - Yoinn
This is a spare part for MFG Crosswind rudder pedals. Consists of both LEFT + RIGHT sensor capCompatible with MFG Crosswind V1,V2,V3 pedals when paired with Yoinnovati sensor cable
USD $ 40.03 Tax excluded -
Vertical parallelogram side - LEFT
This is a spare part for MFG Crosswind rudder pedals. On picture it is explained which side is left and which is right !! This part is for LEFT sideCompatible with MFG Crosswind V1,V2 and V3 pedalsInstructions are below in attachment file !Keep in mind that YOU WILL NEED REPLACEMENT BRAKE AXIS CABLE, which you can also purchase in spare parts....but pay...
USD $ 40.03 Tax excluded -
Vertical parallelogram side - RIGHT
This is a spare part for MFG Crosswind rudder pedals. On picture it is explained which side is left and which is right !! This part is for RIGHTCompatible with MFG Crosswind V1,V2 and V3 pedalsInstructions are below in attachment file !Keep in mind that YOU WILL NEED REPLACEMENT BRAKE AXIS CABLE, which you can also purchase in spare parts....but pay...
USD $ 40.03 Tax excluded -
Footrest Kit for MFG rudder pedals
Sturdy, Ergonomic, antislip designs for flying in shoes or barefoot. - Kit consist of left + right footrest, 4x screws- Compatible with ALL MFG Crosswind models (V1,V2,V3) and WAP addon- Easy footrests style change on only 2x screws per footrestFor 3d printed pedals - Installation Allan imbus key (M6 screw) not included with MFG Crosswind - available as...
USD $ 38.88 Tax excluded26 Review(s) -
Original plastic bag Kit
0010For those who lost some screw or spring. Kit Contain standard spring and hook screw with knob and screw cap, Allan key, two sets of 4x screws (shorter and longer ones)Compatible with V1,V2 and V3 pedals
USD $ 17.15 Tax excluded1 Review(s) -
brake limiter set (left & Right)
This is a spare part for MFG Crosswind rudder pedals. If you exceed 100 kg force on brakes you will need it sooner or later :-)brake limiter set include both left and right limiterComposite material, M6 nut glued inCompatible with MFG Crosswind V1,V2 and V3 pedals, standard part for 20 degree brake action
USD $ 17.15 Tax excluded -
Set of brake axis cables (2x) for V2/3 pedals YOINNOVATI...
0158Cables are preassembled with connectors and sensorsFor MFG Crosswind V2 & V3, as pinout on the cable differ from V1 !!!If you doubt what is your model of the pedals take a look at the picture. Some pedals have retrofitted newer electronics and therefore USB plug will clearly indicate which cable you need !IMPORTANT !!! - Yoinnovati A1302 sensor Read...
USD $ 16.70 Tax excluded -
Set of brake axis cables (2x) for V1 pedals - preassembled
0157Cables are preassembled with connectors and sensorsFor MFG Crosswind V1, as pinout on the cable differ from V2 !!!If you doubt what is your model of the pedals take a look at the picture. Some pedals have retrofitted newer electronics and therefore USB plug will clearly indicate which cable you need !
USD $ 16.70 Tax excluded -
CAM6 - centering profile for MFG pedals
Alternate Centering profile for rudder axis on MFG CrosswindCompatible with V1,V2 and V3 pedalsCAM6 feature stronger center detent like on airliners than CAM4 and CAM5 is more realistic for GA aircraft
USD $ 14.87 Tax excluded -
CAM4 - centering profile for MFG pedals
0011aAlternate Centering profile for rudder axis on MFG CrosswindCompatible with V1,V2 and V3 pedalsCAM4 feature more softer centering than CAM6 and CAM5 is more realistic for GA aircraft
USD $ 14.87 Tax excluded -
Set of brake axis springs rev.3 soft (Left & Right)
0159In case you want different revision from one shipped in your MFG Crosswind pedals.19.08.2021 V3 revision introduced for new pedals - 6% softer than V1 mainly due to combat pedals requirementsAll revisions are compatible with V1,V2 and V3 pedalsTo determine which you already have see list below !
USD $ 9.72 Tax excluded2 Review(s)