Rudders, acessories, spare parts for rudder pedals
This is a spare part for MFG Crosswind rudder pedals. Consists of both LEFT + RIGHT shaft NOTE For V1 pedals : it is likely that you will need small spacer of 0,5mm under sensor cap for a sensor to operate at full range of adjusted angles. spacer can be made of simple paper for example !Compatible with V1,V2 and V3 pedals
This is a spare part for MFG Crosswind rudder pedals. Consists of both LEFT + RIGHT shaft NOTE For V1 pedals : it is likely that you will need small spacer of 0,5mm under sensor cap for a sensor to operate at full range of adjusted angles. spacer can be made of simple paper for example !Compatible with V1,V2 and V3 pedals
This is a spare part for MFG Crosswind rudder pedals. If you exceed 100 kg force on brakes you will need it sooner or later :-)brake limiter set include both left and right limiterComposite material, M6 nut glued inCompatible with MFG Crosswind V1,V2 and V3 pedals, standard part for 20 degree brake action
This is a spare part for MFG Crosswind rudder pedals. Consists of both LEFT + RIGHT sensor capCompatible with MFG Crosswind V1,V2,V3 pedals when paired with Yoinnovati sensor cable
This is a spare part for MFG Crosswind rudder pedals. Consists of both LEFT + RIGHT sensor capCompatible with MFG Crosswind V1,V2,V3 pedals when paired with Yoinnovati sensor cable
Alternate Centering profile for rudder axis on MFG CrosswindColor : mild grey/blackCompatible with V1,V2 and V3 pedals
Alternate Centering profile for rudder axis on MFG CrosswindColor : mild grey/blackCompatible with V1,V2 and V3 pedals
Alternate Centering profile for rudder axis on MFG CrosswindColor : mild grey/blackCompatible with V1,V2 and V3 pedals
Alternate Centering profile for rudder axis on MFG CrosswindColor : mild grey/blackCompatible with V1,V2 and V3 pedals
Alternate Centering profile for rudder axis on MFG CrosswindColor : mild grey/blackCompatible with V1,V2 and V3 pedals
Alternate Centering profile for rudder axis on MFG CrosswindColor : mild grey/blackCompatible with V1,V2 and V3 pedals
Sturdy, Ergonomic, antislip designs for flying in shoes or barefoot. - Kit consist of left + right footrest, 4x screws- Compatible with ALL MFG Crosswind models (V1,V2,V3) and WAP addon- Easy footrests style change on only 2x screws per footrestFor 3d printed pedals - Installation Allan imbus key (M6 screw) not included with MFG Crosswind - available as...
2020 by MFG. All Rights Reserved