TBM930 footrests model
TBM930 quickly gain popularity in MSFS community. As rudder pedal manufacturer I quickly realised the beauty and ergonomics of the rudder pedals footrests. Corrugated antislip surface and somewhat detatched braking part of rudder control part. Similar concept like their earlier Morane soulnier light aircraft I used to fly so I know concept is good. I fell in love with these and so will you so I had to add it to our offer. In my humble opinion these are the most beautiful and very enjoyable rudder footrests to fly width
For TBM930 footrests you will need Imbus key 4mm. Make sure you buy it if you dont have one.
Accessories for rudder pedals
2021 V3 model of rudder pedals
Full changes will be published soon along with new pictures. There are no drastic visual changes in design. however, pedals have undergone substantial changes "under the hood" resulting in beefier (sturdier) critical components and reshaped parts based on 7 years of experience in customer support. There are some notable news too :
- built in threaded holes for hydraulic rudder damper addon
- pre-assembled brake cables secured with cable clamp to prevent damage from cable twisting/pulling
- Overall width of standard pedals reduced 5mm (From 495 to 490mm)
- Modified Me109 style Footplates are 1cm longer with a detachable heel cup (on 2 screws), therefore customers can now increase height of heel cup if their set up require very steep angle of the footrests ( e.g. low seat cockpit)
