rezervni djelovi za pedale

Ima 13 proizvoda.
Ova će se kategorija puniti prema potrebama kupaca. Ako trebate neki rezervni dio koji nije izlistan ovdje javite nam preko online kontaktne forme pa ćemo dodati taj dio ovdje.
Obratite pozornost da kupite ispravan dio za verziju vaših pedala.
Ova će se kategorija puniti prema potrebama kupaca. Ako trebate neki rezervni dio koji nije izlistan ovdje javite nam preko online kontaktne forme pa ćemo dodati taj dio ovdje.
Obratite pozornost da kupite ispravan dio za verziju vaših pedala.
Manje
Više
Prikaz 1 - 13 od 13 stavki
  • SET osovina kočnica - 1 SET osovina kočnica - 1
    na lageru, isporuka odmah
    SET osovina kočnica

    SET osovina kočnica, This is a spare part for MFG Crosswind rudder pedals. Consists of both LEFT + RIGHT shaft NOTE For V1 pedals :  it is likely that you will need small spacer of 0,5mm under sensor cap for a sensor to operate at full range of adjusted angles. spacer can be made of simple paper for example !Compatible with V1,V2 and V3 pedals

    USD $ 44.43 bez PDV-a
  • MFG SiMM8Rge USB joystick elektronika - 1 MFG SiMM8Rge USB joystick elektronika - 1
    na lageru, isporuka odmah
    MFG SiMM8Rge USB joystick elektronika
    0101

    USB universal joystick elektronikaFitted in MFG Crosswind rudder pedals since S/N 0337(V2&V3)Rudder pedals firmware is v5.xx (current v5.05)Universal joystick firmware is v7.xx ( current v7.16)Made in Croatia ( EU )Read description for full info

    USD $ 39.99 bez PDV-a
    11 Recenzija(e)
  • SET poklopca senzora kočnica - Yoinn - 1 SET poklopca senzora kočnica - Yoinn - 1
    na lageru, isporuka odmah
    SET poklopca senzora kočnica - Yoinn

    SET poklopca senzora kočnicaThis is a spare part for MFG Crosswind rudder pedals. Consists of both LEFT + RIGHT sensor capCompatible with MFG Crosswind V1,V2,V3 pedals when paired with Yoinnovati sensor cable

    USD $ 38.88 bez PDV-a
  • Vertical parallelogram side - LEFT - 1 Vertical parallelogram side - LEFT - 1
    na lageru, isporuka odmah
    Vertical parallelogram side - LEFT

    This is a spare part for MFG rudder pedals. On picture it is explained which side is left and which is right !! This part is LEFT sideCompatible with MFG Crosswind V1,V2 and V3 pedalsInstructions are below in attachment file !Keep in mind that YOU WILL NEED REPLACEMENT BRAKE AXIS CABLE, which you can also purchase in spare parts....but pay attention if...

    USD $ 38.88 bez PDV-a
  • Verticalna bočnica paralelograma - RIGHT - 1 Verticalna bočnica paralelograma - RIGHT - 1
    na lageru, isporuka odmah
    Verticalna bočnica paralelograma - RIGHT

    Verticalna bočnica paralelogramaspare part for MFG rudder pedals. On picture it is explained which side is left and which is right !! This part is RIGHTCompatible with MFG V1,V2 and V3 pedalsInstructions are below in attachment file !Keep in mind that YOU WILL NEED REPLACEMENT BRAKE AXIS CABLE, which you can also purchase in spare parts....but pay...

    USD $ 38.88 bez PDV-a
  • Set papučica za MFG rudder pedale

    Sturdy, Ergonomic, antislip designs for flying in shoes or barefoot. Set papučica za MFG rudder pedale- Kit consist of left + right footrest, 4x screws- Compatible with ALL MFG Crosswind models (V1,V2,V3) and WAP addon- Easy footrests style change on only 2x screws per footrestFor 3d printed pedals - Installation Allan imbus key (M6 screw) not included...

    USD $ 37.77 bez PDV-a
    26 Recenzija(e)
  • Original plastična vrećica Kit
    0010

    Za one koji su izgubili neki vijak ili oprugu. Kit sadrži standardnu oprugu, zakačni vijak s podesivom maticom i kapicu, imbus ključ, dva seta po 4x vijka (kraći i duži)Compatible with V1,V2 and V3 pedals

    USD $ 16.66 bez PDV-a
    1 Recenzija(e)
  • set graničnika kočnica (left & Right) - 1 set graničnika kočnica (left & Right) - 1
    na lageru, isporuka odmah
    set graničnika kočnica (left & Right)

    This is a spare part for MFG Crosswind rudder pedals. If you exceed 100 kg force on brakes you will need it sooner or later :-)set graničnika kočnica include both left and right limiterComposite material, M6 nut glued inCompatible with MFG Crosswind V1,V2 and V3 pedals, standard part for 20 degree brake action

    USD $ 16.66 bez PDV-a
  • Set kabela kočnica (2x) for V2/3 pedals YOINNOVATI - preassembled - 1 Set kabela kočnica (2x) for V2/3 pedals YOINNOVATI - preassembled - 1
    na lageru, isporuka odmah
    Set kabela kočnica (2x) for V2/3 pedals YOINNOVATI -...
    0158

    Set kabela kočnica V2/3, Cables are preassembled with connectors and sensorsFor MFG Crosswind V2 & V3, as pinout on the cable differ from V1 !!!If you doubt what is your model of the pedals take a look at the picture. Some pedals have retrofitted newer electronics and therefore USB plug will clearly indicate which cable you need !IMPORTANT !!! -...

    USD $ 16.22 bez PDV-a
  • Set kabela kočnica (2x) for V1 pedals - preassembled - 1 Set kabela kočnica (2x) for V1 pedals - preassembled - 1
    na lageru, isporuka odmah
    Set kabela kočnica (2x) for V1 pedals - preassembled
    0157

    Set kabela kočnicaCables are preassembled with connectors and sensorsFor MFG Crosswind V1, as pinout on the cable differ from V2 !!!If you doubt what is your model of the pedals take a look at the picture. Some pedals have retrofitted newer electronics and therefore USB plug will clearly indicate which cable you need !

    USD $ 16.22 bez PDV-a
  • CAM6 - profil za centriranje na MFG pedalama - 1 CAM6 - profil za centriranje na MFG pedalama - 1
    na lageru, isporuka odmah
    CAM6 - profil za centriranje na MFG pedalama

    profil za centriranje na MFG pedalamaAlternate Centering profile for rudder axis on MFG CrosswindCompatible with V1,V2 and V3 pedalsCAM6 feature stronger center detent like on airliners than CAM4 and CAM5 is more realistic for GA aircraft

    USD $ 14.44 bez PDV-a
  • CAM4 -profil za centriranje na MFG pedalama - 1 CAM4 -profil za centriranje na MFG pedalama - 1
    Proizvod je dostupan s različitim opcijama
    CAM4 -profil za centriranje na MFG pedalama
    0011a

    profil za centriranje na MFG pedalamaAlternate Centering profile for rudder axis on MFG CrosswindCompatible with V1,V2 and V3 pedalsCAM4 feature more softer centering than CAM6 and CAM5 is more realistic for GA aircraft

    USD $ 14.44 bez PDV-a
  • Set opruga kočnica rev.3 mekane (Left & Right) - 1 Set opruga kočnica rev.3 mekane (Left & Right) - 1
    na lageru, isporuka odmah
    Set opruga kočnica rev.3 mekane (Left & Right)
    0159

    Set opruga kočnica rev.3 mekane, In case you want different from one shipped in your MFG Crosswind .Rev.2 spring is approx 13% stronger (and slightly modified fit) than original Rev.1. spring fitted on earlier rudder pedals. (from 28.04.2020 we fit Rev.1 springs on new pedals again !Both revisions are compatible with V1,V2 and V3 pedalsTo determine which...

    USD $ 9.44 bez PDV-a
    2 Recenzija(e)