Rev.2 spring is approx 13% stronger than original Rev.1. spring fitted on earlier rudder pedals.
(from 28.04.2020 we fit Rev.1 springs on new pedals again !
19.08.2021 V3 revision introduced for new pedals - 8% softer than V1 mainly due to more comfortable use with "heels on the floor" type footrests
Rev.1 was fitted on pedals S/N :
0001-3730
4000-4264
8543-8799
8830-8899
10000 - 12448
13000-14064
rev.2 was fitted on pedals S/N < 10000 not included in list above
rev 3 is fitted on :
12449-12999
14064 onwards
INSTALLATION :
Following video can be used as Installation tutorial.
IMPORTANT NOTE : We removed this video from our youtube channel and "brake strenght adjustment" is no longer supported feature. Reason is becouse more than few customers damaged brake shaft while performing this procedure - causing hole on brake shaft to widen up which lead to 1-4 degrees play on brake axis.
It is very important to align screw hole on brake shaft to the screw itself before tightening, as noted on video !!!
https://www.youtube.com/watch?v=jVNSsj6aR10