SET osovina kočnica - 1 Raširi

SET osovina kočnica

Novo

SET osovina kočnica, This is a spare part for MFG Crosswind rudder pedals. Consists of both LEFT + RIGHT shaft

NOTE For V1 pedals :  it is likely that you will need small spacer of 0,5mm under sensor cap for a sensor to operate at full range of adjusted angles. spacer can be made of simple paper for example !
Compatible with V1,V2 and V3 pedals

Više detalja

na lageru, isporuka odmah

Pažnja: Posljednji artikli na stanju!

USD $ 42.02

bez PDV-a

payment logos


Worldwide shipping

If your country is not listed Contact us

INSTALLATION :

Following video can be used as Installation tutorial.
IMPORTANT NOTE :
We removed this video from our youtube channel and "brake strenght adjustment" is no longer supported feature. Reason is becouse more than few customers damaged brake shaft while performing this procedure - causing hole on shaft to widen up which lead to 1-4 degrees play on  axis (see picture below)
It is very important to align screw hole on brake shaft to the screw itself before tightening, as noted on video !!!

https://www.youtube.com/watch?v=jVNSsj6aR10

MFG Crosswind brake shaft assembly

Napiši osvrt

SET osovina kočnica

SET osovina kočnica