IMPORTANT !!! - Due to sensor shortages in 2021, since 23.11.2021 We install new sensor model "Yoinnovati" on all pedals >12567 (Grey) and >14725 (Graphite). New sensor, due to different characteristics, require 1,8mm larger air gap between sensor and a magnet to cover all 20-62 degree sensing range ! Therefore, to get these replacement cables to work properly on pedals older than Serial numbers mentioned above we supply PLASTIC SENSOR CAP SPACERS 1,8mm thick with the cables. When sensor is glued onto the sensor cap, customer must put supplied plastic spacer under sensor cap during assembly.
New sensor cap's for Yoinnovati have "Y" engraved on inner side for distinction.
Alternativery, for cleaner looks of the pedals, customer can also purchase New model of sensor caps from spare parts. On new sensor caps Yoinnovati sensor will be situated on correct distance so there is no need for a plastic spacer.
It is very rarely that cable replacement is necessary therefore please check FAQ regarding issues with brake axis first to avoid unnecessary replacement of these cables
Replacement instructions are described in this video...watch part 4 of the video only, as other parts of video are made for different purpose !!!
After sucessfull cable replacement it is mandatory to calibrate brake axis by using MFG Configurator software !
You are free to replace only 1x cable which is faulty, and keep other cable as a spare in case of future failure. We sell these in a set as it might happen that you damage sensitive cable during process of installing it, so be carefull !