Alternate Centering profile for rudder axis on MFG CrosswindColor : mild grey/blackCompatible with V1,V2 and V3 pedals
This is a spare part for MFG Crosswind rudder pedals. Consists of both LEFT + RIGHT sensor capCompatible with MFG Crosswind V1,V2,V3 pedals
This is a spare part for MFG Crosswind rudder pedals. Consists of both LEFT + RIGHT sensor capCompatible with MFG Crosswind V1,V2,V3 pedals
USB universal joystick controller boardFitted in MFG Crosswind rudder pedals since S/N 0337 (V2&V3)Rudder pedals firmware is v5.xx (current v5.05)Universal joystick firmware is v7.xx ( current v7.16)Made in Croatia ( EU )Read description for full info
Cables are preassembled with connectors and sensorsFor MFG Crosswind V1, as pinout on the cable differ from V2 !!!If you doubt what is your model of the pedals take a look at the picture. Some pedals have retrofitted newer electronics and therefore USB plug will clearly indicate which cable you need !
Cables are preassembled with connectors and sensorsFor MFG Crosswind V2 & V3, as pinout on the cable differ from V1 !!!If you doubt what is your model of the pedals take a look at the picture. Some pedals have retrofitted newer electronics and therefore USB plug will clearly indicate which cable you need !
In case you want different revision from one shipped in your MFG Crosswind pedals.Rev.2 spring is approx 13% stronger (and slightly modified fit) than original Rev.1. spring fitted on earlier rudder pedals. (from 28.04.2020 we fit Rev.1 springs on new pedals again !Both revisions are compatible with V1,V2 and V3 pedalsTo determine which you already have...
2020 by MFG. All Rights Reserved