This is a spare part for MFG Crosswind rudder pedals. Consists of both LEFT + RIGHT shaft NOTE For V1 pedals : it is likely that you will need small spacer of 0,5mm under sensor cap for a sensor to operate at full range of adjusted angles. spacer can be made of simple paper for example !Compatible with V1,V2 and V3 pedals
This is a spare part for MFG Crosswind rudder pedals. Consists of both LEFT + RIGHT shaft NOTE For V1 pedals : it is likely that you will need small spacer of 0,5mm under sensor cap for a sensor to operate at full range of adjusted angles. spacer can be made of simple paper for example !Compatible with V1,V2 and V3 pedals
This is a spare part for MFG Crosswind rudder pedals. If you exceed 100 kg force on brakes you will need it sooner or later :-)brake limiter set include both left and right limiterComposite material, M6 nut glued inCompatible with MFG Crosswind V1,V2 and V3 pedals, standard part for 20 degree brake action
This is a spare part for MFG Crosswind rudder pedals. Consists of both LEFT + RIGHT sensor capCompatible with MFG Crosswind V1,V2,V3 pedals when paired with Yoinnovati sensor cable
This is a spare part for MFG Crosswind rudder pedals. Consists of both LEFT + RIGHT sensor capCompatible with MFG Crosswind V1,V2,V3 pedals when paired with Yoinnovati sensor cable
Alternate Centering profile for rudder axis on MFG CrosswindColor : mild grey/blackCompatible with V1,V2 and V3 pedals
Alternate Centering profile for rudder axis on MFG CrosswindColor : mild grey/blackCompatible with V1,V2 and V3 pedals
Alternate Centering profile for rudder axis on MFG CrosswindColor : mild grey/blackCompatible with V1,V2 and V3 pedals
Alternate Centering profile for rudder axis on MFG CrosswindColor : mild grey/blackCompatible with V1,V2 and V3 pedals
Sturdy, Ergonomic, antislip designs for flying in shoes or barefoot. - Kit consist of left + right footrest, 4x screws- Compatible with ALL MFG Crosswind models (V1,V2,V3) and WAP addon- Easy footrests style change on only 2x screws per footrestFor 3d printed pedals - Installation Allan imbus key (M6 screw) not included with MFG Crosswind - available as...
USB universal joystick controller boardFitted in MFG Crosswind rudder pedals since S/N 0337 (V2&V3)Rudder pedals firmware is v5.xx (current v5.05)Universal joystick firmware is v7.xx ( current v7.16)Made in Croatia ( EU )Read description for full info
For those who lost some screw or spring. Kit Contain standard spring and hook screw with knob and screw cap, Allan key, two sets of 4x screws (shorter and longer ones)Compatible with V1,V2 and V3 pedals
2020 by MFG. All Rights Reserved