Alternate Centering profile for rudder axis on MFG CrosswindColor : mild grey/blackCompatible with V1,V2 and V3 pedals
Alternate Centering profile for rudder axis on MFG CrosswindColor : mild grey/blackCompatible with V1,V2 and V3 pedals
WAP - Set of Width Adjustment Plates for MFG Crosswindcolor : grey / blackCompatible with V1,V2 and V3 pedals
WAP - Set of Width Adjustment Plates for MFG Crosswindcolor : graphite / blackCompatible with V1,V2 and V3 pedals
Kit consist of 1x Adjustable hydraulic damper, 2x Din912 M8x40 screws, 2x Aluminum 16,5mm long ring Stand-offs ( Spacers)Compatible with MFG Crosswing V3 pedals ONLYEasy installation on only 2x screwsAdjustable damping force (23 increments)Allan imbus key for M8 not supplied
Kit consist of 1x Adjustable hydraulic damper, Composite damper holder, 1x Din912 M8x40, 1x Din912 M8x80, 2x Din912 M6x35 screws, 2x Aluminum 16,5mm long ring Stand-offs ( Spacers)Compatible with MFG Crosswing V1,V2 pedals (also work on V3 but V3 kit is easier to install )Adjustable damping force (23 increments)Installation is a bit more complex than V3...
Soft spring for main rudder axis centering. Considering that standard spring that comes with pedals is very realistic and therefore provide adjustment range from middle strong to strong, we offer this soft variant which provide force range variation from extreeme soft to middle strong.If you are used to softness in majority of plastic pedals and you like...
In case you want different revision from one shipped in your MFG Crosswind pedals.Rev.2 spring is approx 13% stronger (and slightly modified fit) than original Rev.1. spring fitted on earlier rudder pedals. (from 28.04.2020 we fit Rev.1 springs on new pedals again !Both revisions are compatible with V1,V2 and V3 pedalsTo determine which you already have...
2020 by MFG. All Rights Reserved