Rudder pedals

There are 25 products.

Rudders, acessories, spare parts for rudder pedals

Showing 13 - 24 of 25 items
  • Brake axis shaft SET - grey
    in stock, immediate shipping
    Brake axis shaft SET - grey
    0009

    This is a spare part for MFG Crosswind rudder pedals. Consists of both LEFT + RIGHT shaftCompatible with MFG Crosswind V2 pedals and V1 pedals  ( see note) NOTE For V1 pedals :  it is likely that you will need small spacer of 0,5mm under sensor cap for a sensor to operate at full range of adjusted angles. spacer can be made of simple paper for example !

    USD $ 47.93
  • Brake axis shaft SET - graphite Brake axis shaft SET - graphite
    Out of stock
    Brake axis shaft SET - graphite
    0009a

    This is a spare part for MFG Crosswind rudder pedals. Consists of both LEFT + RIGHT shaftCompatible with MFG Crosswind V2 pedals and V1 pedals  ( see note) NOTE For V1 pedals :  it is likely that you will need small spacer of 0,5mm under sensor cap for a sensor to operate at full range of adjusted angles. spacer can be made of simple paper for example !

    USD $ 47.93
  • Original plastic bag Kit
    Available
    Original plastic bag Kit
    0010

    For those who lost some screw or spring. Kit Contain standard spring and hook screw with knob and screw cap, Allan key, two sets of 4x screws (shorter and longer ones)

    USD $ 16.30
  • CAM4 - mild grey/black
    in stock, immediate shipping
    CAM4 - grey
    0011

    Alternate Centering profile for rudder axis on MFG CrosswindColor : mild grey/black

    USD $ 15.58
  • CAM4 - graphite/black
    in stock, immediate shipping
    CAM4 - graphite
    0011a

    Alternate Centering profile for rudder axis on MFG CrosswindColor : mild grey/black

    USD $ 15.58
  • CAM6 - mild grey/black
    in stock, immediate shipping
    CAM6 - grey
    0012

    Alternate Centering profile for rudder axis on MFG CrosswindColor : mild grey/black

    USD $ 15.58
  • CAM6 - graphite/black
    in stock, immediate shipping
    CAM6 - graphite
    0012a

    Alternate Centering profile for rudder axis on MFG CrosswindColor : mild grey/black

    USD $ 15.58
  • MFG SiMM8Rge USB joystick MFG SiMM8Rge USB joystick
    in stock, immediate shipping
    MFG SiMM8Rge USB joystick controller
    0101

    USB universal joystick controller boardFitted in MFG Crosswind rudder pedals since S/N 0337Rudder pedals firmware is v5.xx (current v5.05)Universal joystick firmware is v7.xx ( current v7.16)Made in Croatia ( EU )Read description for full info

    USD $ 43.14
    2 Review(s)
  • Soft Spring for MFG Crosswind
    in stock, immediate shipping
    Soft Spring for MFG Crosswind
    0116

    Soft spring for main rudder axis centering. Considering that standard spring that comes with pedals is very realistic and therefore provide adjustment range from middle strong to strong, we offer this soft variant which provide force range variation from extreeme soft to middle strong.If you are used to softness in majority of plastic pedals and you like...

    USD $ 4.79
    4 Review(s)
  • Set of brake axis springs rev.2 (Left & Right) Set of brake axis springs rev.2 (Left & Right)
    Out of stock
    Set of brake axis springs rev.2 (Left & Right)
    0156

    In case you want different revision from one shipped in your MFG Crosswind pedals.Rev.2 spring is approx 13% stronger (and slightly modified fit) than original Rev.1. spring fitted on earlier rudder pedals. (from 28.04.2020 we fit Rev.1 springs on new pedals again !Both revisions are compatible with V1 and V2 pedalsTo determine which you already have see...

    USD $ 10.19
  • Set of brake axis cables (2x) for V1 pedals - preassembled Set of brake axis cables (2x) for V1 pedals - preassembled
    in stock, immediate shipping
    Set of brake axis cables (2x) for V1 pedals - preassembled
    0157

    Cables are preassembled with connectors and sensorsFor MFG Crosswind V1, as pinout on the cable differ from V2 !!!If you doubt what is your model of the pedals take a look at the picture. Some pedals have retrofitted newer electronics and therefore USB plug will clearly indicate which cable you need !

    USD $ 16.30
  • Set of brake axis cables (2x) for V1 pedals - preassembled Set of brake axis cables (2x) for V1 pedals - preassembled
    in stock, immediate shipping
    Set of brake axis cables (2x) for V2 pedals - preassembled
    0158

    Cables are preassembled with connectors and sensorsFor MFG Crosswind V2, as pinout on the cable differ from V1 !!!If you doubt what is your model of the pedals take a look at the picture. Some pedals have retrofitted newer electronics and therefore USB plug will clearly indicate which cable you need !

    USD $ 16.30